The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

oneperfectrun · 08-17-2018, 10:41 PM

New switch looks right. Looks like you pryed the plastic piece from the metal part on old switch. That isn’t the way it was supposed to come apart. Separate the plastic piece like the one on the new switch from the other piece where the wires go in. The spades you see on new switch are there. You just separated in the wrong place. The actual plug is the piece where you see the wires going in.

08-17-2018, 10:41 PM	#5
oneperfectrun Registered User Join Date: Aug 2011 Location: Fulton, MS Posts: 87	Re: Ignition switch question New switch looks right. Looks like you pryed the plastic piece from the metal part on old switch. That isn’t the way it was supposed to come apart. Separate the plastic piece like the one on the new switch from the other piece where the wires go in. The spades you see on new switch are there. You just separated in the wrong place. The actual plug is the piece where you see the wires going in.