11-17-2019, 06:39 AM
|
#2
|
|
Old member
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 19,936
|
Re: turn signal problem
Quote:
Originally Posted by superdav
Its my drive to work 91 nissan beater truck not my square
Last week the front left blinker quit, the bulb was dark like it may have blown so I got new bulbs, driving home the front right blinker quit. Changed both bulbs, same thing, no front blinkers.
I was thinking if the flasher relay quit it killed the whole circuit (?) but I had a spare and changed it, front left still didn't work.
The high beam switch hasn't worked in a long time but could the blinker/headlight switch cause only the front blinkers to quit?Today is my only day off so I will have to go 6 days to my next day off with no front blinkers.
Quick recap for those who say I talk too much
front blinkers dont work
rear blinkers do work
blinker/running lights are the same bulb, they all light up but front don't blink
high beam doesn't work unless i wiggle the switch
|
There is a possibilty it's the switch. The fact that they light up when the parking lights are turn on would mean the ground is good. You should have fuses also for the blinker. I would start with finding them and checking those as well. 
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver
Seeing the USA in a 71
Upstate SC GM Truck Club
2013,14 and 2016 Hot Rod Pour Tour
http://upstategmtrucks.com/
Get out and drive the truck this summer and have some fun!
It sucks not being able to hear!
LWB trucks rule, if you don't think so measure your SWB!
After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.
|
|
|