[uber cool]

This morning started out wet play day


So decided to fabricate some brackets for the rear air bags. started with some 75 x 40 box section and made it up as I went along.




Then need to make some brackets for the bottom of the air bag, so turned this

into this


Bit of air bag control relay temporary lash up to get things moving

Air bags in place and brackets welded to chassis and trailing arms


With this success moved into the exhaust, got a stainless back back but only 2" outlet Boo....... So grafted on a 3" stainless pipe with a slash cut for good measure.



worked out how to route the exhaust up over the axle and clear in full height and lowered. But that can be tomorrows job.