The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Caustik · 01-26-2020, 01:01 AM

cut and tacked the passenger side, pulled the bedsides for now, and got to drive it for the fuel station. Much needed motivational quick rip.

Also stepped to a 345-25/20 much better fit on the wheels.

Been working on brake stuff in my down time at work, the curent plan is to run 06-10 SRT8 jeep Brembo setup up front, that will give 14" rotors and 4 pots, Was going to run the XTS calipers, but they are too small for the 14" rotor. the Jeep stuff is a 5x5 pattern, with a 71mm hub hole so the hub had to be turned down to fit. I'm probably going to put the XTS calipers out back with some smaller rotors, probably a 12".

01-26-2020, 01:01 AM	#38
Caustik Registered User Join Date: Apr 2017 Location: Elizabeth Posts: 40	Re: In the Red 69 GMC cut and tacked the passenger side, pulled the bedsides for now, and got to drive it for the fuel station. Much needed motivational quick rip. Also stepped to a 345-25/20 much better fit on the wheels. Been working on brake stuff in my down time at work, the curent plan is to run 06-10 SRT8 jeep Brembo setup up front, that will give 14" rotors and 4 pots, Was going to run the XTS calipers, but they are too small for the 14" rotor. the Jeep stuff is a 5x5 pattern, with a 71mm hub hole so the hub had to be turned down to fit. I'm probably going to put the XTS calipers out back with some smaller rotors, probably a 12".