Re: 1979 Chevrolet C70 Conversion to OEM Air Conditioning
Once the cowl padding is installed and the wire harness is passed thru the cowling it is time to install the heater core housing (cab side). On the right side is a bolt that can be started to hold this housing in place while you install the evaporator housing (engine compartment side). Do not tighten this bolt until all the other bolts are installed.
The next two pictures show an area that I had to trim to give the evaporate clearance to align properly. If you look close just to the left of the heater core holes you will see a small tab that had to be removed.
|