[Bugeyev8]

Got the Captain Fab brake booster bracket ready to install, very nice bracket and great service, I cut the booster rod and made a coupler to go between the stock pedal rod and the new booster rod, held together with 2 1/4 20 set screws, I was going to weld it but I did not feel safe welding on stuff like this and if the booster was to ever need replacing...I would have to do this again, my way the booster can be removed and replaced easy, I did have to drill the 2 drivers side outboard holes out a bit on the bracket because no matter what I tried the bolts were way off, I have a feeling these trucks are all made a little different, but everything else fit great !!

Thanks Captain Fab !!