View Single Post
Old 02-01-2022, 12:43 AM   #4
Gunner41
Registered User
 
Gunner41's Avatar
 
Join Date: May 2011
Location: San Jose, Ca
Posts: 93
Re: Gauge cluster repair

1. The fuel sort of went bonkers and its off by about 1/4 tank which i can deal with but it would be nice especially with the 35 gl tank.
2. The temp always says its overheating even tho I know its not. I added a mechanical and plumbed it into the R/S head and my OBD II live data shows it hits 195-197 on average but has hit 200 so i marked 195 on the mechanical. The cluster says 230 so no its wrong.
Now for the annoying one. My oil pressure has dropped years ago it showed 5-15 PSI and so I verified that really it was good. I replaced the pump to a Melling high volume pump and steel one piece shaft when I had the pan off and also verified that it works with another mechanical gage. Sorry im long winded. The other day I heard a grinding sound then the gage shot up full blast and goes all the way up when I run the truck. Ugh
Oh its my 3500 7.4
Gunner41 is offline   Reply With Quote