The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**jabborabbo** · 01-09-2021, 07:06 PM

Does it end up flush with the hub or about 1/10 inch high? I’ve searched the threads and get conflicting answers. I thought it was flush, but ending up boogering the seal trying to get it flush. I’ve measured the seal and inner race height and both are the same as the old ones.

Thanks!

01-09-2021, 07:06 PM	#1
jabborabbo Senior Member Join Date: Apr 2013 Location: Podunk, Texas Posts: 741	‘67 front inner bearing seal... Does it end up flush with the hub or about 1/10 inch high? I’ve searched the threads and get conflicting answers. I thought it was flush, but ending up boogering the seal trying to get it flush. I’ve measured the seal and inner race height and both are the same as the old ones. Thanks! __________________ "It is hard to search for a black cat in a dark room, particularly if it is not there. Especially if this cat is smart, brave, and polite." Sergei Shoigu, Russian Minister of Defense