Re: 1977 GMC CCDW build
Got a PM about the rear seat. The upper portion was a straight forward swap just set it in place hold the hinge fold it down drill holes screw the tapered bolts in. the Lower section I cut the legs down and welded them back to together this shortens the legs and allows you to fold the seat up. On the passenger side it doesn't do much except when the bottom is folded out the top can fold down further making it easier to reach the middle. The top portion will not fold down all the way since the hinge on the bottom will not allow enough travel. on the driver side I used the center support took some metal out and notched it now this side flipping up is nice it allows you to easily use the center area for storage I think I'm going to find or build a tray for that area.
|