View Single Post
Old 12-08-2019, 11:26 AM   #41
msg
Registered User
 
Join Date: Feb 2013
Location: GA
Posts: 1,313
Re: 350 GM Crate Motor questions for a 66 C10

I have purchased the L31 and its on its way. Ive also bought a good many other things to go along with the build.

Melonized gear
https://www.summitracing.com/parts/CCA-412M

Intake
https://www.summitracing.com/parts/EDL-2116

Electric Fuel pump
https://www.summitracing.com/parts/HLY-12-427

Flexplate
https://www.summitracing.com/parts/SUM-G104SFI

I spoke with American Autowire and explained what I was up to. They recommended this kit

Wiring harness
https://www.summitracing.com/parts/aww-500560

I was told that I will need to change out my alternator for an internally regulating alternator so thats a part Ill be looking for. I will be installing the Vintage Air sure fit system in the future so the compressor is planned for the passenger side. I have a long water pump and all the v style pulleys and brackets that were on my 350, but if going serpentine makes more sense I can check out the local scrap yards for all the pump pulleys and what nots but needed some help with what to look for years models etc. Im also looking for the honda civic coupe door weatherstripping ive heard good things about so Ill be there anyway.

Looking forward to seeing things progress. Been like this for a while now.
Attached Images
 
__________________
Progress thread for my 66
http://67-72chevytrucks.com/vboard/s...d.php?t=623848
msg is offline   Reply With Quote