View Single Post
Old 06-28-2004, 01:38 AM   #7
ante_up13
Registered User
 
Join Date: May 2004
Location: Here
Posts: 167
I used a 36mm socket for the uppers and a 41mm for the lowers. Although Standard sockets would have fit better especially on the uppers...the sockets I had worked fine. I can give you the torque specs...do you have a C-10 or 20 or 30

I used my 1/2 in drive torque wrench with an adapter to make it a 3/4 in drive
ante_up13 is offline   Reply With Quote