|
Re: Another L.E.D Turn Signal Problem
Quote:
Originally Posted by Robznob11
That is correct if you have done that. I actually had both styles of flasher too. The one without the lead says no load bu they should say low load . Walmart has cheap load risistors. Just try one..... if rhat makes it work then you need to try another style of flasher with the strap. One thing for sure if it will work with a load resistor it is either polarity of flasher or type of flasher.
|
That is the style I'm trying to get to work right now (Flasher with ground wire)
__________________
1970 2wd  3/4 ton- 2004 crate 350 thorley tri-y headers-edelbrock performer eps manifold 600cfm performer carb, crane cams energizer cam,lifters, dual 2.5 magnaflows, mallory HEI, powermaster 140 amp altenator, griffen aluminum radiator.(8 MPG  )
|