|
Re: Here's a simple solution to center speakers
The next three photos are just me roughing in the tweeter pod. I use Rage Gold and just a bit of Duraglass mixed in at about a 1:1 ratio...
The first photo is with 40 grit paper (I use this to rough in my shapes as the cheese grater won't fit into these small spaces.
The second photo is at 120 grit...
And the last photo is with the tweeter cup test fitted...I'll final sand this at 120 grit to work out any imperfections. I'll be covering this with an 1/8 closed polycell foam plus material...so I don't sand beyond 120. Plus, with 120 grit, it gives the glue a bit of edge to grab onto...
|