[sgaylord]

Update:::::

After the POR-15 and the weld thru primer have dried I placed the lower cowl/kick panel section in place and lined it up using the bolts where the dash is bolted in. After moving it around till I was satisfied it was in the correct place I welded it in place and ground down the welds. I have some pics of the section before I welded it in place but none afterwards. I will take some and post them in the next update.

I removed the gas tank and rear window. Once I finish the cowl and firewall I will remove the cab and place it on the dolly to finish the lower "A" pillar's, partial floor sections and cab corners. More fun.....

Short post today for lots of work completed last night.