The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Help needed for Wilwood disc brake upgrade

basketcase · 03-23-2020, 12:15 AM

If your flex line is 3AN I just did a braided hose conversion on my '69 with '72 brakes. Of course you know that the drivers side hard line fitting is 7/16x24 and the passenger side is 3/8x24 thread even though the hard line tubing is the same. I used an Earls 3AN to 7/16 Summit pn EAR-989549ERL on the left side and a Wilwood Summit pn WIL-220-13124 3/8x3AN on the right side. Summit price was $6.64 and $8.26. These both fit the crossmember tabs and the clips fit them too.

Tom

03-23-2020, 12:15 AM	#3
basketcase Registered User Join Date: Oct 2001 Location: Edgerton OH USA Posts: 627	Re: Help needed for Wilwood disc brake upgrade If your flex line is 3AN I just did a braided hose conversion on my '69 with '72 brakes. Of course you know that the drivers side hard line fitting is 7/16x24 and the passenger side is 3/8x24 thread even though the hard line tubing is the same. I used an Earls 3AN to 7/16 Summit pn EAR-989549ERL on the left side and a Wilwood Summit pn WIL-220-13124 3/8x3AN on the right side. Summit price was $6.64 and $8.26. These both fit the crossmember tabs and the clips fit them too. Tom __________________ '69 swb stepside in progress. '59 Corvette lifetime project