The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

shifty · 05-04-2007, 02:56 AM

I bought this setup, after seeing it installed in '68 short step's truck:

http://cgi.ebay.com/ebaymotors/1999-...9768QQtcZphoto

With that said:

Pros: It looks sweet and comes with everything you need.
Cons: You gotta move your battery to another location.

I am using a stock auxillary battery tray to move the battery to the passenger side of truck

Notes:

RE: your fuel line setup: Very creative. BE AWARE: you need to be able to put at least 50PSI to the fuel rail, make sure your pump can generate that. Your engine should have a regulator built into the rail if it's truck/newer.

Don't forget hose clamps

be sure your fuel line can handle 50PSI pressure without blowing up

05-04-2007, 02:56 AM	#3
shifty Questionable Join Date: Mar 2005 Location: Atlanta Posts: 13,376	Re: 5.3L GenIII /TH400 swap I bought this setup, after seeing it installed in '68 short step's truck: http://cgi.ebay.com/ebaymotors/1999-...9768QQtcZphoto With that said: Pros: It looks sweet and comes with everything you need. Cons: You gotta move your battery to another location. I am using a stock auxillary battery tray to move the battery to the passenger side of truck Notes: RE: your fuel line setup: Very creative. BE AWARE: you need to be able to put at least 50PSI to the fuel rail, make sure your pump can generate that. Your engine should have a regulator built into the rail if it's truck/newer. Don't forget hose clamps be sure your fuel line can handle 50PSI pressure without blowing up __________________ If I've got anything up for grabs, it'll be here: 7-hole gauge cluster for a 67-72 p/u FREE (link) I can't check the forum daily. If I don't reply to you within 24 hours, drop me a PM! I'm (hopefully) still alive and will reply faster to a PM. Last edited by shifty; 05-04-2007 at 02:57 AM.