The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Pontitruck · 02-19-2019, 09:45 PM

Hi guys,

I am in the middle of adding a 4l60e to 5.3 in my 65. I have the DD Slider set up but I believe the perches need to be move on the frame to the forward location as the trans is tight at the floor and I have quite a bit of room between the electric fans and the pulleys. You can see I'm adjusted as far forward as the sliders will go.
My question is what holes are your perches in, front or back for an LS? The pics show the holes closest to the front.

Thanks

02-19-2019, 09:45 PM	#1
Pontitruck Registered User Join Date: Sep 2018 Location: South of the Indy 500 Posts: 116	Engine Perch Mounting Hole Question Hi guys, I am in the middle of adding a 4l60e to 5.3 in my 65. I have the DD Slider set up but I believe the perches need to be move on the frame to the forward location as the trans is tight at the floor and I have quite a bit of room between the electric fans and the pulleys. You can see I'm adjusted as far forward as the sliders will go. My question is what holes are your perches in, front or back for an LS? The pics show the holes closest to the front. Thanks Attached Images