Re: 86 Suburban daily driver
The motor needed to be cleaned up, and learning from the last LS swap I did I'm changing some gaskets now while it is easy, vs later when it is in the vehicle and difficult! True to form, I had 7 of the exhaust manifold bolts either broken off already or broke when I removed them. No big deal, my tried and true method worked well.
I bought a lower profile oil pan, which saves me about 3" of depth vs. the truck oil pan. This one had good reviews on eBay, and the casting and machining looks to be of good quality. It came with a gasket, but I'll use a FelPro because I don't want to do it twice.
After one round of power washing and degreaser, it looks much better! I'll still do some additional work on it with carb cleaner and a small wire brush, but I'm getting close there. I'll need to get some other things checked off the to-do list before I begin the swap, but I'm looking forward to diving into it!
|