Quote:
Originally Posted by clinebarger
Key switches are cheap & easy to change.
|
! agree 100%!! OR if the housing is screwed swap columns. BUT if you must rig it, just unbolt the ignition switch and let it hang and use a screwdriver to turn it on an off and start it. Please don't hack up the harness.
The truck is also easy to hot wire, run a wire to the positive side of the coil you can put it on an on/off switch if you desire and if I was gonna leave it long term I would wire in a ballast resistor like on a Chrysler. To start it run a positive wire to the small terminal on the strter solenoid, put it on a push button.