The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Beelzeburb, The Story More Than a Decade in the Making

Beelzeburb · 06-17-2010, 11:36 AM

Glad you like it so far MAK.

On a side note, I just found my measurement for the weight of the stock 454 cast iron TBI intake manifold.
51.9 lbs. bare
It was on a sticky note in the back of my FSM along with:
Left side exhaust manifold w/ A.I.R. tubing = 22.2 lbs.
Right side exhaust manifold w/ A.I.R. tubing = 24.6 lbs.
I bought a couple of high quality scales a year or so ago just for the purpose of weighing car parts and I happened to have them at the shop before I threw these pieces in with the rest of the scrap.

06-17-2010, 11:36 AM	#47
Beelzeburb Devil's in the Details Join Date: Sep 2008 Location: Southern Utah Posts: 353	Re: Beelzeburb, The Story More Than a Decade in the Making Glad you like it so far MAK. On a side note, I just found my measurement for the weight of the stock 454 cast iron TBI intake manifold. 51.9 lbs. bare It was on a sticky note in the back of my FSM along with: Left side exhaust manifold w/ A.I.R. tubing = 22.2 lbs. Right side exhaust manifold w/ A.I.R. tubing = 24.6 lbs. I bought a couple of high quality scales a year or so ago just for the purpose of weighing car parts and I happened to have them at the shop before I threw these pieces in with the rest of the scrap. __________________ '70 K10 Suburban - TBI 454, 4L80E, NP241C, Dana 60 & 44 - The 10+ Year Project Thread Datsun 240Z, 510 2 door and an old Honda motorcycle Last edited by Beelzeburb; 06-17-2010 at 02:31 PM.