The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**PGSigns** · 10-15-2019, 07:14 AM

Get a socket the fits your impact so you get rid of the adapters. That will help. Then you have to have something solid to hold the yoke. If it is shaking you are getting very little of the impacts power applied. I have a 36" pipe wrench I use. The blow air from your compressor till it cuts on. Wait for it to cut off then hit the nut. That will give you the most from what you have. Then there is always a bit of heat to get it a little more in the mood to move.
Jimmy

10-15-2019, 07:14 AM	#7
PGSigns Senior Member Join Date: Jan 2011 Location: Hayes Va Posts: 4,569	Re: Pinion nut won't move. Get a socket the fits your impact so you get rid of the adapters. That will help. Then you have to have something solid to hold the yoke. If it is shaking you are getting very little of the impacts power applied. I have a 36" pipe wrench I use. The blow air from your compressor till it cuts on. Wait for it to cut off then hit the nut. That will give you the most from what you have. Then there is always a bit of heat to get it a little more in the mood to move. Jimmy __________________ 60 to 66 Chevy and GMC window decals http://67-72chevytrucks.com/vboard/s...d.php?t=661131 Good friends, good food and a hotrod what else do you need? 1966 BBW long fleet Daily driver 1965 BBW short fleet Sold and going to a good home 1965 Suburban 2003 3500 Duramax 2005 Ultra Classic