The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

tbrown5079 · 12-18-2010, 02:02 PM

Houston54 I can't help you too much, but you do realize you have to change the whole interstructure for the big window. I had another guy do that, then we put the new back panel on. The top inside piece was a chore, because of the double curviture. It was pretty rusted but he made it work. You can see on the picture that its going to need smoothing. Rather than deal with replacing the bottom corners and other issues with the sheetmetal we thought it would be easier to just replace the whole panel. Good luck!

12-18-2010, 02:02 PM	#55
tbrown5079 Registered User Join Date: Feb 2007 Location: Blairsville, PA Posts: 301	Re: 56 Cameo build Houston54 I can't help you too much, but you do realize you have to change the whole interstructure for the big window. I had another guy do that, then we put the new back panel on. The top inside piece was a chore, because of the double curviture. It was pretty rusted but he made it work. You can see on the picture that its going to need smoothing. Rather than deal with replacing the bottom corners and other issues with the sheetmetal we thought it would be easier to just replace the whole panel. Good luck!