The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - What's the best and easiest way to get an EFI fuel setup with in cab tank?

Tork? · 07-10-2018, 10:04 AM

I envision using a simple weld on sump at bottom center of the tank with holes drilled in tank behind it to make a sort of fuel bucket and prevent starvation. They're super cheap on eBay like $25 and have an/npt fittings already on them. Gravity feed that through the existing holes in the cab floor to an inline pump. There's also the bolt on sumps diesel folks use to cure starvation with similar theory. Then use existing sender for the return through the top.

07-10-2018, 10:04 AM	#12
Tork? Registered User Join Date: May 2013 Location: Chicago, IL Posts: 217	Re: What's the best and easiest way to get an EFI fuel setup with in cab tank? I envision using a simple weld on sump at bottom center of the tank with holes drilled in tank behind it to make a sort of fuel bucket and prevent starvation. They're super cheap on eBay like $25 and have an/npt fittings already on them. Gravity feed that through the existing holes in the cab floor to an inline pump. There's also the bolt on sumps diesel folks use to cure starvation with similar theory. Then use existing sender for the return through the top. Attached Images