[msg]

Originally Posted by The Rocknrod

They gotta be 1/4"-20, check and see.
If they are - https://www.ebay.com/itm/10-pc-1-4-2...IAAOSwB51c1uua

Thanks again Rocknrod, it has to be cause thats the closest size I can see that will work. Ive got 2 or 3 coats of paint on the panels that I think I may have to re tap the threads on due to the build up, the 1/4" -20 threads in a few turns and gets pretty tight. Im sure all of the panels like this will have the same bolt threading issue due to paint build up.

Originally Posted by forestb

I think the seal is the same as the inner fender seal. If i remember correctly the inner fender seal is one long piece and you cut that portion out to use on that piece.

Thanks, I'll give it a try with the fender seal I have. Gott get some stainless staples now.