The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

0ldSoul · 04-02-2020, 01:19 PM

Prepping the drop spindles for paint. I used VHT Caliper paint to resist corrosion and chemicals such as brake fluid/cleaner.
Neat trick I found watching youtube, if you tap the edges with a hammer, it masks a hole perfectly.

The caliper paint stated it needed a baking process for curing to give it that protective state. Fortunately, Walmart had an extra large countertop oven.

04-02-2020, 01:19 PM	#20
0ldSoul Registered User Join Date: Feb 2019 Location: Upper Left USA Posts: 83	Re: My 1963 Build Prepping the drop spindles for paint. I used VHT Caliper paint to resist corrosion and chemicals such as brake fluid/cleaner. Neat trick I found watching youtube, if you tap the edges with a hammer, it masks a hole perfectly. The caliper paint stated it needed a baking process for curing to give it that protective state. Fortunately, Walmart had an extra large countertop oven. Last edited by 0ldSoul; 04-04-2020 at 11:48 PM.