The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - AR BBC serpentine brackets & Factory a/c underhood parts

BossHogg69 · 07-09-2012, 08:23 PM

I have a factory 7.4L (88-90 Mark IV 454 TBI) serpentine accessory drive. These are the stamped steel brackets, and fan/clutch assembly, powdercoated gloss black - they have not been used since being powdercoated, only mounted. The idler pulley and tensioner are included, but they are used. The brackets can accomodate an R4 a/c compressor, but this set is a non a/c set, so it has a cast iron idler pulley bracket to go in place of the compressor. The pulleys are not included, as I planned to use a March performance underdrive crank & alternator pulley set. $200 + shipping

07-09-2012, 08:23 PM	#1
BossHogg69 motor exploder Join Date: Mar 2009 Location: Pittsburgh, PA Posts: 2,346	BBC serpentine brackets & Factory a/c underhood parts I have a factory 7.4L (88-90 Mark IV 454 TBI) serpentine accessory drive. These are the stamped steel brackets, and fan/clutch assembly, powdercoated gloss black - they have not been used since being powdercoated, only mounted. The idler pulley and tensioner are included, but they are used. The brackets can accomodate an R4 a/c compressor, but this set is a non a/c set, so it has a cast iron idler pulley bracket to go in place of the compressor. The pulleys are not included, as I planned to use a March performance underdrive crank & alternator pulley set. $200 + shipping Attached Images __________________ Adam 1969 Chevy CST/10 stepside, DART Big M/TREMEC Magnum Extreme/3.73's w/Detroit Truetrac 1965 Chevy Bel Air Wagon (daily driver), 327/TH350,10 bolt w/3.08's 1961 Chevy Bel Air Sport Coupe, ZZ454/M21/9" rear w/3.50's & Detroit Truetrac 2005 GMC 1500 ccsb 2wd, 6.0L/4L65e/3.73 G80 2006 GMC 2500HD ccsb 4x4, DMax LBZ/Allison 6spd/4.56's w/Detroit TrueTrac Use the SEARCH function on this forum - it is your friend!! Last edited by BossHogg69; 03-13-2013 at 01:54 PM.