|
Re: better ride quality
Quote:
Originally Posted by forestb
I have a 62 C10 with a 350 and a 77 c10 front cross member. I have cpp 2 inch drop spindles and 2 inch drop springs and drop shocks with relocated brackets. In the rear I have 1 inch drop blocks and 4 inch drop coils and drop shocks with relocated brackets. Sway bars front and rear and an adjustable panhard bar.
The ride quality is not vary good. I found it feels better with a little weight in the bed. I can give the specks on the front shocks if it would help but don't have the rear.
I know that air bags will give me a smoother ride but I don't know if I want to go that far if I don't need to.
What do you all recommend?
|
You need to determine the spring rate of the rear coils. What brand?
What shocks & relocating kit was used?
What is the wheel tire combination?
__________________
67SWB-B.B.RetroRod
64SWB-Recycle
89CCDually-Driver/Tow Truck
99CCSWB Driver
All Fleetsides
@rattlecankustoms in IG
Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive.
It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar.....
Cubic inches is like Indiana Jones with a cheap pistol.
|