The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

66C10LB · 09-07-2016, 04:05 PM

Thanks Franken and Marv! I tried again today with success. Thanks again for the advice.
I used a bit of a novel method.....I took two short pieces of oak flooring, bungeed them together, slid them over the shifter so that they rested on top of the sphere....holding onto both extended ends of the oak flooring, I pushed down and twisted, easily removing the shifter.

09-07-2016, 04:05 PM	#4
66C10LB Registered User Join Date: Jul 2016 Location: West Kelowna, BC, Canada Posts: 204	Re: Shifter removal, 4 spd. Thanks Franken and Marv! I tried again today with success. Thanks again for the advice. I used a bit of a novel method.....I took two short pieces of oak flooring, bungeed them together, slid them over the shifter so that they rested on top of the sphere....holding onto both extended ends of the oak flooring, I pushed down and twisted, easily removing the shifter.