|
Re: Drop set ups and wheel combos!!
Quote:
Originally Posted by wixthedog
I run the same set up as Loco pretty much. This picture is 2.5" drop spindles and 2" drop springs in the front and a rear flip kit with 5 leaf packs.
Front is 15x8 with 4" BS and 245/60/15. Rears are 15x10 with 5" BS and 295/50/15.
The front is a little too low for me so I have some 1" drop springs coming in today.
|
Very very nice.
I really with I would have gone with a flip kit. I wasnt going for more than 4 inches at the time so I did shackles and hangers then scrapped the stock parts. Now I want just another inch or so out back. I am considering removing the overload leaf and rolling with 3 leafs. Also should get some drop shocks it's on factory length right now
__________________
- When the Reaper makes his deal, trust in your steel -
'77 C10 350/350 2/4 drop and a mild street engine
|