[XwalkerX]

hey LS1Nova I have a 2005 5.3 in my truck but im running a 2002 PCM and cable throttle body.

I have to find a cruise module and pigtail still.
(side question: can I run one from an s10 as long as it doesn't have a wire from the H terminal and just go to the dealer to get the correct fitting for it to mount on my throttle body?)

ideally id like to run a toggle to power the system and a momentary to set it just to keep a cleaner look.

so for the toggle switch it would just be:
the grey wire which should be on/off (terminal A on the cruise module) on one side
the lead to 12v with the ignition on the other side?

for the momentary switch it should be:
one side going to the dark blue wire which is set/coast (terminal B on the cruise module) the other side going to green which is resume/accel (terminal C on the cruise module)
in the middle would be the 12v with ignition on


other than that I just follow everything else you posted in the original post?