Quote:
Originally Posted by XwalkerX
hey LS1Nova I have a 2005 5.3 in my truck but im running a 2002 PCM and cable throttle body.
I have to find a cruise module and pigtail still.
(side question: can I run one from an s10 as long as it doesn't have a wire from the H terminal and just go to the dealer to get the correct fitting for it to mount on my throttle body?)As easy as it is to find a Silverado module, I would try to find one. You can't really change the end of the cable very easily.
ideally id like to run a toggle to power the system and a momentary to set it just to keep a cleaner look.
so for the toggle switch it would just be:
the grey wire which should be on/off (terminal A on the cruise module) on one side
the lead to 12v with the ignition on the other side? Correct
for the momentary switch it should be:
one side going to the dark blue wire which is set/coast (terminal B on the cruise module) the other side going to green which is resume/accel (terminal C on the cruise module)
in the middle would be the 12v with ignition on This is correct if you have a two position toggle switch, you just have to make sure it rests at no voltage.
other than that I just follow everything else you posted in the original post?Correct
|
Answers in
bold above. As for the H terminal, if you get a module out of a truck, it will be fine, the not having the H is more for car modules.