Re: thinking about getting this in the morning
Yea. Open up the slider and that bracket is held down by two phillips head screws. You'll need to remove the rubber filler gasket that just pulls out. No need to deal with that single flat head screw. Hopefully the ones I send you have better set screws.
Two on bottom, two on top. Get those squirted with penetrating oil. One on each bottom bracket were frozen when I took them off.
__________________
- Jeff
89' K5 Blazer, 2.5" lift, 35" tires
04' GMC Yukon XL, 3/4 ton, 8.1L
|