[84chevyguyid]

I honestly cant remember, I have mixed and matched up so many different pieces to get what I wanted in the dash I have lost track. In the little square box above the speedo/tach I took out "glow plug and water in fuel" and put in tow/haul and check trans indicators. I searched through the warning light plastics and came up with the 4 wheel drive and brake indicators. I actually cut that out of two different pieces and stuck them in. The plastic dash piece that holds the gauges didnt have a hole for the brake warning light and I drilled it in and carved it out so the light would go in it. The printed circuit had the place for the bulb so that part was easy. I had to cut out the back for the air gauge too. Its a heinz 57!