|
Re: Rear brakes lock up before fronts
On my POL prop valve, there are 3 outlets...1 for the rear and 2 for the front..the 2 front fittings give you the option to run a single line to a splitter with 1 opening plugged,.... or 2 lines from the prop valve , 1 to each front wheel
I opted to plug 1 outlet and run a single line to a splitter in the center of the frame under the radiator,,,and then on to each front wheel...I basically copied the brake system that was on the burb I parted out for the axles
All my front lines are 3/16, my rear is 1/4 that splits in to 2 3/16 lines on the rear axle..
Mine is disc drum
|