The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

slow4dr · 05-21-2019, 07:07 PM

A little progress on the firewall. Also made some tabs for the tranny crossmember so it will unbolt and drop out from the bottom. Turns out the 4L80 I used for mock up had a different (more shallow) pan on it. The current pan hangs about .5" lower which means the engine had to go forward and up. Will be making the engine crossmember next.

05-21-2019, 07:07 PM	#205
slow4dr Registered User Join Date: Mar 2011 Location: SoCal Posts: 151	Re: TCI to start new R&D Project with a C10! A little progress on the firewall. Also made some tabs for the tranny crossmember so it will unbolt and drop out from the bottom. Turns out the 4L80 I used for mock up had a different (more shallow) pan on it. The current pan hangs about .5" lower which means the engine had to go forward and up. Will be making the engine crossmember next.