The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**Jason Banks** · 05-30-2023, 07:48 PM

I would not switch to a 1-wire alternator. Not sure what all you have going on, but the 105a factory alternator should do all you need.

I would run a larger cable from alternator to starter. That is what I did on mine. I think I used 8 guage. 4 sounds like overkill from the alternator...

I'd go thought and make sure all your connections are clean and grounds are well connected too.

05-30-2023, 07:48 PM	#2
Jason Banks Senior Member Join Date: Dec 1999 Location: TX Posts: 1,528	Re: single wire alt I would not switch to a 1-wire alternator. Not sure what all you have going on, but the 105a factory alternator should do all you need. I would run a larger cable from alternator to starter. That is what I did on mine. I think I used 8 guage. 4 sounds like overkill from the alternator... I'd go thought and make sure all your connections are clean and grounds are well connected too.