The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Rokcrln · 09-28-2008, 07:27 PM

Another 6hrs down and way to many more to go! I sectioned the outer door edge were the window felts go so it would match the pass side and not drag on the glass. I just cut sections out of a donor front door and Tig'd then in place. Then I made the cradle for the fixed vent window and installed the inner door handle latch mounting area. Then 3hrs of fun started when I had to rebuild the door lock system in reverse but it is done and works great.

Their Will not be any progress until next weekend because I am taking off in an hour to head down for my class this week with Lazzy to learn the English wheel, power bead roller and other panel fabrication tools. I will be taking pics

Kevin
LFD Inc.

09-28-2008, 07:27 PM	#51
Rokcrln Senior Member Join Date: Jul 2005 Location: Winters Ca. 95694 Posts: 4,843	Re: LFD's 4dr Burb Build Another 6hrs down and way to many more to go! I sectioned the outer door edge were the window felts go so it would match the pass side and not drag on the glass. I just cut sections out of a donor front door and Tig'd then in place. Then I made the cradle for the fixed vent window and installed the inner door handle latch mounting area. Then 3hrs of fun started when I had to rebuild the door lock system in reverse but it is done and works great. Their Will not be any progress until next weekend because I am taking off in an hour to head down for my class this week with Lazzy to learn the English wheel, power bead roller and other panel fabrication tools. I will be taking pics Kevin LFD Inc.