The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

TA_C10 · 03-03-2019, 11:03 PM

Drivers Cab Corner Completed

I finished the driver cab corner today Man I'm so happy you guys convinced me to switch to .023 wire. It's sooo much easier to get a nice flat weld which makes less grinding work

The rear corner will need a bit 'o' filler but nothing too bad. It's not perfect but I will be the only one who knows

This next piece I started from the top and slowly worked my way down so it was really easy to form the piece as I went and especially when I got to the curves at the bottom. Worked great.

03-03-2019, 11:03 PM	#118
TA_C10 Registered User Join Date: Jun 2018 Location: Texas Posts: 1,353	Re: TA_C10: Stage 1 Drivers Cab Corner Completed I finished the driver cab corner today Man I'm so happy you guys convinced me to switch to .023 wire. It's sooo much easier to get a nice flat weld which makes less grinding work The rear corner will need a bit 'o' filler but nothing too bad. It's not perfect but I will be the only one who knows This next piece I started from the top and slowly worked my way down so it was really easy to form the piece as I went and especially when I got to the curves at the bottom. Worked great. __________________ TA_C10 Stage 1 build - http://67-72chevytrucks.com/vboard/s....php?p=8333444 "It's only money".