03-13-2020, 10:23 PM
|
#16
|
|
Old member
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 19,936
|
Re: Stock alternator to 12 SI alternator
Quote:
Originally Posted by studeclunker
okay, smoke under the dash. Black wire with white stripe. Have I got something reversed? My Alternator is a bit different from the earlier pictured model. That's a new plug from FLAPS. The blue wire shown connects to the white harness wire and the black connects to the blue harness wire. As per how the previous stock plug was.
 |
I'm sorry but I'm not following you with your wire colors. You are gonna have to strip the harness from the old external regulator. Then wire it like the drawings. I don't know what you have and your picture doesn't show me anything. The plastic connector is marked 1&2 and the wires must go to the right spots no matter what color they are. 
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver
Seeing the USA in a 71
Upstate SC GM Truck Club
2013,14 and 2016 Hot Rod Pour Tour
http://upstategmtrucks.com/
Get out and drive the truck this summer and have some fun!
It sucks not being able to hear!
LWB trucks rule, if you don't think so measure your SWB!
After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.
|
|
|