The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

joelbert62 · 03-19-2018, 10:53 PM

Just came across this .Did you sort it out ? I have similar problem but it just rubs a little . Its cure is going to newer idler arm , bracket , center link . but mine works as is. this fix I understand helps the issue of turning tighter one way than the other also . I found this info here. FYI I also used the same kit . think you have to use a adapter outer tie rod end if I remember correctly. I hope to do this on my 64.

03-19-2018, 10:53 PM	#2
joelbert62 Registered User Join Date: Mar 2017 Location: Idaho Posts: 11	Re: 1966 C10 Power Steering conversion issue Just came across this .Did you sort it out ? I have similar problem but it just rubs a little . Its cure is going to newer idler arm , bracket , center link . but mine works as is. this fix I understand helps the issue of turning tighter one way than the other also . I found this info here. FYI I also used the same kit . think you have to use a adapter outer tie rod end if I remember correctly. I hope to do this on my 64.