[Wwes]

Build recap:

April 2017 - Gifted a 1983 K10 from a family member, paid $400 to have it shipped from North Carolina. All body panels seem to be original, the only modified thing I could find is the TH350 transmission instead of the 700R4. Engine is a 305 and runs good, but will be changed out.

Plans: Working restore - new paint, interior, and re-working of the drivetrain. Want it to look period correct, and I've always loved the 350 TBI engines, so let's build the truck with new paint, interior, and a TBI 350/700R4 as GM would have produced it in 1987. It will look exactly like a factory 1987 truck under the hood.

Project is divided into three phases.

Drivetrain:

Completed:
1. Removed original 305/TH350.
2. Procured a TBI 350 engine, wiring harness, 700R4.
3. Rebuild 700R4 and NP208 transfer case. Reinstalled.
4. 350 engine installed, computer wired up, new fuel tanks, pumps, lines, etc.

To Do:
5. Get engine running.
6. New factory-style exhaust.

Exterior

Completed:
1. Removed 3" body lift kit. This involved some cutting of the welded bumped mounts. Replaced all bushings with new LMC parts.
2. Purchased new core support. Existing one is rotted near the battery.
3. Frame sanded and repainted.
4. New brakes and brake lines at all four corners.

To Do:
5. Full repaint.
6. Replace damaged tailgate.


Interior

Completed:
1. Replaced steering column with a newer unit, with stalk wiper controls and high-beams. Tested out working good.
2. Removed most interior trim and repainted with SEM original colors.

To Do:
3. Replace carpet, headliner, seat cover, and dash pad.

That pretty much sums it up.