Re: Upper Radiator Hose/Dirty Dingo Clearance
You could make a sheet metal hose cradle/shield that bolts to the alternator / engine that holds the hose off of the belt and would act like a shield if the belt fails.....
it looks like they deigned the brackets for the LS3 water pumps but for truck balance spacing?
side note, if you happen to have a ruler, time and the space to measure center to center of the dirty dingo belt tensioner. (center of the bolt to the center of the pulley installed on the tensioner...
Pretty sure its a F-250 belt tesioner, but cannot find the length, center to center. its for another project
thanks,
clint
edit,
Gates has a hose catalog with pictures of the hoses. Its organized based on hose I.D. and then length. When I do my coolant those builds, I look at the catalog and can gauge what will probably work out based on the shape shown in the picture. Ive not been let down once
__________________
1987 Silverado - L83 5.3 w/ 6L80e ,A/C,P/W,P/L,TILT, HID projectors, Wilwood C-10 Pro Spindles w/ 2018 silverado front brakes & C-5 Corvette Rear Disc Brakes
1999 BMW 528i - 5.7 LS1 w/ 4l60e, Ford 8.8 IRS w31 spline posi & FX-r projector retrofit
New project: 2006 BMW x5 6cyl AWD to L83 6l80e 4wd to 2WD / RWD
A poor man buy's it twice
finally got my domain name back, 87chevy.com.... site rework in progress
|