The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**Gregski** · 03-10-2020, 10:34 AM

Idle Tuning - Cylinder Airmass

So this calls for adding yet another channel called Cylinder Airmass to our Attic, now before you all freak out and say Greg you told us this was going to be three things and here we have now added well over a dozen channels, allow me to explain.

Yes Idle Tuning focuses on three things, RPM, Timing, and Airflow, however in order to know what to tweak and why, we need supporting information ie additional Channels, but they are nothing new, we have covered them ahead of time in prior posts / write ups when we laid the foundation as this tutorial builds upon prior knowledge. Please see post #285 Also I already admitted I sometimes sprinkle in additional Channels (ie Mass Airflow, Dynamic Airflow) just for the sake of demonstration, so once you read through this once, you decide what Channels you will need to tune idle, kapish?

03-10-2020, 10:34 AM	#364
Gregski Post Whore Join Date: Aug 2014 Location: Sacramento, CA Posts: 10,810	Re: HP Tuners Tutorials - Idle Tuning Idle Tuning - Cylinder Airmass So this calls for adding yet another channel called Cylinder Airmass to our Attic, now before you all freak out and say Greg you told us this was going to be three things and here we have now added well over a dozen channels, allow me to explain. Yes Idle Tuning focuses on three things, RPM, Timing, and Airflow, however in order to know what to tweak and why, we need supporting information ie additional Channels, but they are nothing new, we have covered them ahead of time in prior posts / write ups when we laid the foundation as this tutorial builds upon prior knowledge. Please see post #285 Also I already admitted I sometimes sprinkle in additional Channels (ie Mass Airflow, Dynamic Airflow) just for the sake of demonstration, so once you read through this once, you decide what Channels you will need to tune idle, kapish? Attached Images Last edited by Gregski; 03-11-2020 at 09:21 AM.