The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

72 CustomCamper · 12-19-2009, 05:38 PM

Here's another custom. Used 2 beds and frames to make a Longhorn.

Here's an in progress shot of the Longhorn

Used a spare bed to make this trailer.

This one is mostly out of the box. Changed wheels and tires and added a top.

Here's a long bed I cut down to make a half cab blazer

Here's the short step that Special-K mentioned

Lowering is not hard. The newer kits use plastic pin to hold the front wheels on. You can drill new holes to lower the front. In the rear I glue a piece of round plastic tube into the molded in diff and use the metal axle in the tube...

Chuck

12-19-2009, 05:38 PM	#6
72 CustomCamper huh ??? Join Date: Nov 2002 Location: Fredericksburg,Va. Posts: 3,369	Re: Custom Models Here's another custom. Used 2 beds and frames to make a Longhorn. Here's an in progress shot of the Longhorn Used a spare bed to make this trailer. This one is mostly out of the box. Changed wheels and tires and added a top. Here's a long bed I cut down to make a half cab blazer Here's the short step that Special-K mentioned Lowering is not hard. The newer kits use plastic pin to hold the front wheels on. You can drill new holes to lower the front. In the rear I glue a piece of round plastic tube into the molded in diff and use the metal axle in the tube... Chuck __________________ 90 Blazer Silverado 350w/ 700R4 and 32" Kelly's "I am a bomb technician. If you see me running try to keep up!"