The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - POR-15 failure

shadetree · 07-25-2002, 01:42 AM

My wife and I are doing a frame-off, and tried Por-15 on the frame. We used the entire product line, we followed instructions, and this stuff is: not adhering, not chemical resistant, not chip proof, not uniform in color appearance, and is peeling off in sheets.
I am not getting any responce from Por-15 support people. I refuse to call anybody at NAPA or any other store, as I bought this stuff from Por-15, not NAPA.
I am also very dissappointed with Por-15's exhaust coating system. Same symptoms, stuff peels off, plus, rust is forming on my new duals!
At this time, I urge members of this board to try other products for rust proofing, my wife and I are. We have to sand blast this stuff off, first, though.
steve

07-25-2002, 01:42 AM	#1
shadetree Senior Member Join Date: Dec 1999 Location: Knightstown, in, usa Posts: 2,525	POR-15 failure My wife and I are doing a frame-off, and tried Por-15 on the frame. We used the entire product line, we followed instructions, and this stuff is: not adhering, not chemical resistant, not chip proof, not uniform in color appearance, and is peeling off in sheets. I am not getting any responce from Por-15 support people. I refuse to call anybody at NAPA or any other store, as I bought this stuff from Por-15, not NAPA. I am also very dissappointed with Por-15's exhaust coating system. Same symptoms, stuff peels off, plus, rust is forming on my new duals! At this time, I urge members of this board to try other products for rust proofing, my wife and I are. We have to sand blast this stuff off, first, though. steve __________________ 1970 long fleet, 355 4 speed, primer, walnut goodies