The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Slippy · 06-12-2019, 08:24 PM

The transmission crossmember is in the stock location. I had to make a block to adapt from the np241 to the original holes in the crossmember. Was quite simple. I believe I used a piece of 1x2 square tubing.

06-12-2019, 08:24 PM	#54
Slippy Registered User Join Date: Apr 2018 Location: Antler ND Posts: 97	Re: 72 Blazer build The transmission crossmember is in the stock location. I had to make a block to adapt from the np241 to the original holes in the crossmember. Was quite simple. I believe I used a piece of 1x2 square tubing.