The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

jkade · 01-05-2008, 06:52 AM

If you are going to be low in the front I would use a f body pan, I have a truck pan on my 67 and it is way low. I have to be carfull about where I pull in to avoid it hitting anything. Just the pan new from gm is about $200 and you will need the pickup tube also, you can make the truck windage tray work with a little cutting. Look out on LS1.tech, I bought a fbody pan off there a few weeks ago with the pickup tube for $160 shipped.

01-05-2008, 06:52 AM	#16
jkade Senior Member Join Date: Nov 2005 Location: AL Posts: 2,519	Re: LS1 swap. What oil pan did you use? If you are going to be low in the front I would use a f body pan, I have a truck pan on my 67 and it is way low. I have to be carfull about where I pull in to avoid it hitting anything. Just the pan new from gm is about $200 and you will need the pickup tube also, you can make the truck windage tray work with a little cutting. Look out on LS1.tech, I bought a fbody pan off there a few weeks ago with the pickup tube for $160 shipped.