View Single Post
Old 10-05-2015, 10:11 PM   #20
HellaciousA
Registered User
 
HellaciousA's Avatar
 
Join Date: Aug 2014
Location: Los Angeles, CA
Posts: 39
Re: "Burrari" my first project, 70 c10 swb

I spent some time and pulled out the broken a/c system. Found a lovely mice nest inside the dash. I also finally discovered the factory color of the cab, which is orange. Pretty cool. I bought some block off plates from ebay that cover everything up nicely. I'll install those soon, I just need to buy some butyl tape or adhesive and some hardware. I also found some minor rust near the blower motor. Not too severe, but will likely need to be cut out and a new piece grafted in.





I'm also trying to decide if I should pull the front sheetmetal and cab off and roll the frame into my garage. That way I can clean up the frame and it'll be a lot easier to work on. Not really sure as I don't have a lot of space to store the cab and front sheet metal.

After that I'll likely start ordering the no limit parts and get this thing rolling.
__________________
1970 C10 Short wide
-No Limit Pro-Tech Chassis 6.0 LQ4 / BW S480 Turbo
2004 Pontiac GTO, 419rwhp/378rwtq, -H/C/I/E, M6
2014 Cadillac CTS-V Auto
HellaciousA is offline   Reply With Quote