The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

TA_C10 · 04-15-2022, 11:19 AM

So here is the first result from my app driving around before I put these resonators on. Then I used the resonator spreadsheet I found online(from Lawrence Tolman(LT) from his youtube channel, powernation trucktech guy).

I ran several tests and the average number was 116Hz. So I plugged that into the calc. My drone is around 1700 RPM mostly so I used the 35" number for length. I went exactly 35".

.

04-15-2022, 11:19 AM	#1176
TA_C10 Registered User Join Date: Jun 2018 Location: Texas Posts: 1,353	Re: TA_C10: Stage 1 So here is the first result from my app driving around before I put these resonators on. Then I used the resonator spreadsheet I found online(from Lawrence Tolman(LT) from his youtube channel, powernation trucktech guy). I ran several tests and the average number was 116Hz. So I plugged that into the calc. My drone is around 1700 RPM mostly so I used the 35" number for length. I went exactly 35". . Attached Images __________________ TA_C10 Stage 1 build - http://67-72chevytrucks.com/vboard/s....php?p=8333444 "It's only money". Last edited by TA_C10; 04-15-2022 at 11:28 AM.