Frozen Bleeders
This is a common problem, the solution is fairly simple :
Right after you spray the next shot of penetrating oil on the threads, *SMACK* the bleeder screw dead on with a hammer, the shock will wick the penetrant in and loosen the threads .
If you smack it off center or sideways, you'll snap it off so pay close attention here .
I'm sure you already know to only use a SIX POINTED tool on any bleeder valve ! .
__________________
-Nate
Geezer
'49 3100 235 W/ Muncie SM420 SOLD
'69 C/10 shortbed sidemount survivor 250 L6 W/ 350TH
|